Supply Lined Paper Line Production For The Juul Relx Myle Flow Yooz
3 ply corrugated carton production line
NO | MACHINES LIST | QUANTITY |
Hydraulic Mill Roll Stand --Support two Dia.1500mm paper mill --Including track and trolley for carry paper mill --Using multi-point brake | 3 SETS | |
2 | Preheater (RG) Ø900mm | 1 SET |
3 | Pre-condition Ø900mm | 1 SET |
4 | Fingerless Single Facer (SF-360c) --Corrugating roller Dia.360mm,with a drum. --Press roller Dia.365mm. with drum. --Gimbal driver system --Touch screen and PLC control system | 1 SET
|
5 | Single Overhead Bridge --vacuum tension control --Electric paper way control | 1 SET |
6 | Duplex Preheater (RG) Ø900mm | 1 SET |
7 | Single Glue Machine -- Glue roller embossed and plated treatment --Independent driver system --Touch screen and PLC control system | 1 SET |
8 | Double Baker Facer (SM-E) --Including quality cotton belt 1set --including drive roll stand --including 14pcs(14 x 600MM) heating plates --New design and in cluding 5 pcs press bar | 1 SET |
9 | Thin blade Slitter Scorer ZQS --4 set slitter knives and 6 set scorer wheel --automatic grinding knives | 1 SET |
10 | N.C Cut-off( helical Knives) --With full Germany servo Computer system --Keeping 999 order | 1 SET |
11 | Paper Sheet Delivery --with automatic calculation computer --the max. Paper delivery length 3500mm | 1 SET |
12 | Internal Steam Pipe System | 1 SET |
13 | Internal Electric System | 1 SET |
14 | Glue Making System | 1 SET |
HB-I Hydraulic Mill Roll Stand
1.Machine Description:
*This machine is used for supporting the paper roll, supply the paper to the production line.
2.Machine Function:
*It can be loading two paper rolls at the same time, without stopping the machine for changing paper roll
*The whole machine use 6 cylinders fully hydraulic controlled, hydraulic control arm lift and down, clamping and open, left and right moving
PH-60 Preheater
1.Machine Description:
*This machine is used for heating liner (pre-heating for raw paper), and dry to control temperature and humidity
2.Machine Function:
*Electric to adjust the wrap angle, preheating area can be in 360° range
*Dishing seal structure on two sides,saving the steam and improving heating efficiency
SF-A15 Single Facer
1.Machine Description:
*Single facer is design for producing single-face corrugated paper
OBH Conveying Bridge
1.Machine Function:
*Main frame made by channel steel, and angle steel
*With protecting handrail and safety pedal on both sides, the operation side is installed with safety ladder, to make sure the safety and convenience of the worker
*Vacuum suction tension control,5 inch suction pipe with adjusting valve,draw fan power can be adjusted freely
GM-15 Gluer Machine
1.Machine Function:
*After the glue roller surface quenched,tempered,ground and engraved pit,then doing balancing,making coating evenly, consume less glue
*Glue roller controlled by frequency motor , the inverter control ensures glue line speed is synchronous with double facer, and can also operate independently
*Plc control the glue amount,automatically adjusted according to the production speed Automatic circulation for glue, avoiding glue precipitation
DF-60Double Facer
1.Machine Description:
*Corrugated paper enter into the double facer hot parts with heating and molding after pasted glue, and become board after cooling
2.Machine Function:
*Hot Plates’ surfaces is ground and then chromed plated,width 600mm and 14pics,cooling parts 4m
*Hot plates adopts the press shoes structure,it lifting adopt pneumatic structure
*Heat conductive pipe of hot plates control the temperature segmented
SS-E Electric Slitter Scorer
1.Machine Function:
*Frequency motor driving
*5 blades 8 lines type, blade is made of tungsten alloy steel, cutting smoothly and service life is more than 30,000 m
NC-15 Cut Off Machine
1.Machine Function:
*The knife adopts spiral steel helical knife structure, serrated knife type, scissors shearing, keeping small shear force and long service life
*The knife rollers adopt high quality precision forged steel material, having good stability after balanced
AS Gantry Stacking
1.Machine Function:
*Gantry type stacking,change the order in 5 seconds,automatically count, automatically traverse,automatically change orders
*Automatically and smoothly outputs the paper horizontally with inverter control, when the stacking reaches the setting quantity
*Rear baffle positioning by AC servo control,changing orders automatically, quickly and precisely
