Water And Sewage Treatment O2 Gas Plant 1-100m3 Psa Oxygen Generator With Low Price Free Service Warranty Iso/ce Certificated

(0 评论)
估计运输时间: 3 天

所售:
J-1 Limited

价格:
$40,698.90 /Pc

Model Number:
Power:
数量:
(10000 可用的)

总价:
退款:
分享:
Product Description
In the aeration of water (air oxidation), the gases oxygen and nitrogen compete with each other due to their different partial pressures. The maximum oxygen saturation is therefore limited to approx. 12 mg/l (8°C) or 10 mg/l (15°C) depending on the temperature of the air (the higher the temperature, the lower the oxygen saturation).
When using oxygen or technically produced oxygen with a concentration of 93 - 95%,
* up to 4.5 times higher saturation can be achieved,
* energy-intensive mixing systems and large oxidiser tanks can be omitted,
* better oxidation is achieved,
* the venting systems can be dimensioned considerably smaller.

For this reason, we only use technical oxygen for oxygen enrichment. This is generated in high quality directly on site by means of oxygen generators. The gas mixture is finely filtered through several graduated filters and contains only a small amount of nitrogen. The correct quantity is dosed by means of mass flow controllers.
CAN GAS Oxygen PSA Generators separates oxygen (O2) from compressed air utilizing pressure swing adsorption technology. Compressed air, which consists of approximately 21% oxygen and 78% nitrogen, is passed through a bed of zeolite molecular sieve (ZMS). The sieve preferentially adsorbs N2 and moisture over O2 allowing the O2 to pass through as a product gas at pressure. While one of the towers is in the adsorption phase the other tower is regenerated by de-pressurizing, at which time the sieve releases the adsorbed gases to the atmosphere, and the cycle is then repeated.
A solid state programmable controller operates the process valves on an alternating cycle, with built-in logic for automatic
stop/start. Oxygen flow and purity remain constant regardless of the peak usage demands. Under normal operating conditions and with correct maintenance the zeolite molecular sieve will have an almost indefinite lifetime.
Working Principle
Specification
Model
Capacity 
(Nm³/h)
Purity 
(%)
O2 Outlet Pressure (MPa)
Dimensions (mm)
CAPO-3
2.2-3









93±3









0.3-0.5
1200*1000*1840
CAPO-5
3.5-5


1350*1200*2050
CAPO-10
6-10


1500*1350*2350
CAPO-15
11-15


1750*1550*2300
CAPO-20
16-20


1850*1825*2350
CAPO-25
21-25


2000*1900*2350
CAPO-30
26-30


2100*2050*2400
CAPO-35
31-35


2000*1300*2400
CAPO-50
47-52


1800*1700*2400
CAPO-80
72-80


2250*1550*2970
CAPO-100
91-100


2300*1550*3200
CAPO-120
120


2300*1550*3400
CAPO-150
150


2300*1550*3500
The above table shows some models of oxygen generators, others can be customizable.
Company Profile
CAN GAS Systems Company Limited, identified as the Beijing Key High-tech Corporation, is one of the initial companies involved in air separation industry. CAN GAS is committed to continuously providing core value to customers in all industries. With 28,000 square meters’ production base, five national patents and ISO9001:2008 Certificate of Quality Management System Certification, CAN GAS has been an integration of R&D, design, manufacture, sales, service. Over the past ten years, CAN GAS has successfully provided over 1000 sets of air separation systems for many industries in over 40 countries and regions.
CAN GAS Systems have a range of PSA nitrogen & oxygen generators, membrane nitrogen & oxygen generators, nitrogen purification systems etc, and are widely used in industries of petroleum, oil & gas, chemicals, electronics, metallurgy, coals,
pharmaceuticals, aerospace, autos, glass, plastics, food, medical treatment, grain, etc. With years research in air separation technology and rich solution experiences in various industries, CAN GAS sticks to providing our clients with more reliable, more economical, more convenient professional gas solutions.
By now we have supplied CANGAS® systems for clients including GE USA, WILMAR International Singapore, DEGUSSA Group Germany, SAMSUNG, ORION Korea, China Petrol, Sinopec, etc. CAN GAS has built up a global distributor system covering Russia, Bangladesh, Indonesia, Pakistan etc. During the 2008 Olympics, CAN GAS was selected by Beijing Food Safety Test Center as the supplier for nitrogen generator to test the Olympic food.
Certifications
Service
Warranty: PERIOD of warranty is 18 months after shipment or 12 months after commissioning, whichever occurs first. It is
responsible for CANGAS to analysis, answer breakdowns for users all through the working life of CANGAS oxygen generator. Engineer can be sent on-site for free after-service service if necessary. Please refer to Warranty terms for more information.

Installation & Commissioning & Training: CANGAS service engineer is available to instruct the installation and start up of this plant (6 days at job site with service fee or remotely).If job site service is needed the buyer should prepare flights,
accommodation, food and local transportation for CANGAS service engineer.
Customer Photos
FAQ
1. What's the order to have an oxygen or nitrogen generator plant ?
a. Inquiry---provide us all clear requirements.
b. Quotation---official quotation form with all clear specifications.
c. Contract confirmation---provide correct contract details.
d. Payment terms
e. Production
f. Shipping
g. Installation and commissioning
h. Conducting routine after sales support

2. How to get a prompt quotation of Oxygen or Nitrogen Generator?
When you send the inquiry to us, pls kindly send it with below technical information.
1) O2/N2 flow rate: _____Nm3/hr( or How many cylinders/ liquid do you consume per day(24hours))
2) O2/N2 purity: _____%
3) O2/N2 discharge pressure: _____Bar
4) Voltages and Frequency : ______V/___PH/___HZ
5) Application:
6) Project Location:
7) Job site altitude___, ambient temperature___
8) Machine room availability Y/N
该产品暂无评论。

产品查询 (0)

登录 or 登记将您的问题提交给卖家

其他问题

没有人问过卖家