畅销产品
Product Description
Two Way Radio TH1N Charger for AP880i Rechargeable Battery
1. Intelligent rapid 6 way unit charger |
2. Charges 6 batteries or radios with different models at the same time |
3. Automatic recognition of battery chemisry then charging in different way |
4. Charging way: trickle charging mode(start)---quick charging mode---trickle charging mode(near full) |
5. Inside 110V-240V power supply apply for international use. All kinds power cable available |
6. 100% aging testing before assembling |
7. Many kinds of protection: temperature protection/identify the bad battery/inspection of low or high voltage/inspection of full power/set the maximum time/0 V power remind, etc. |
8. Space-saving design, charger can be put on the table or hang on the wall |
9. Energy-saving design, 10 years lifetime design |
10. ABS+PC for charger case which is more robust and durable |
11.Charging notes: charging-red, full-green, failure-flashing lights |
Specification
Features:
The charger can charge a wide range brand of radio batteries at CC (constant current) for Ni-MH/NI-CD battery packs, and CC-CV for Li-Ion battery packs.
This charger will self-testing based on the temperature and the protection function of overcharge and over-discharged. If test passes, it will go on charging progress, or it will only charge the battery with very low current.
A. Activate function
If the rechargeable battery's voltage is too low in hibernation, it would turn into short -time strong current charging to
activate the battery. This progress would last about 3minutes. If the voltage recovered in 3minutes, the charging will go normal instantly. In this progress, the indicator will be flashing RED.
B. Voltage in saturation
If the voltage of the battery is saturated, the charger automatically makes an inspection of it. The light will flash Green if it
is saturated.
C. Higher or Lower Temperature
When the battery has gotten a lower temperature, the charging would go on with a micro-current until it returned to normal.Then proceed to high-current charging.During the whole charging progress, the charger automatically keep making temperature detect. If the temperature is much higher (over 55 degree), the charging would be stopped and the light would flash Green.
D. Chemistry Analysis and Voltage Identification
Before charging, the charger would make a chemistry and voltage detection on the battery. And then adjust its own charging voltage and current data according to the analyzed results which will keep the battery charging better and safer.
E. Self-selective charging Methods
For the charger’s automatic chemistry analysis and voltage identification function, so it can charge different batteries. The battery can be 3.6V Li-ion / 7.2VLi-ion, 7.2V Nickel-metal hydride or nickel-cadmium battery. With different pods, it can charge different battery with different brands.
The charger can charge a wide range brand of radio batteries at CC (constant current) for Ni-MH/NI-CD battery packs, and CC-CV for Li-Ion battery packs.
This charger will self-testing based on the temperature and the protection function of overcharge and over-discharged. If test passes, it will go on charging progress, or it will only charge the battery with very low current.
A. Activate function
If the rechargeable battery's voltage is too low in hibernation, it would turn into short -time strong current charging to
activate the battery. This progress would last about 3minutes. If the voltage recovered in 3minutes, the charging will go normal instantly. In this progress, the indicator will be flashing RED.
B. Voltage in saturation
If the voltage of the battery is saturated, the charger automatically makes an inspection of it. The light will flash Green if it
is saturated.
C. Higher or Lower Temperature
When the battery has gotten a lower temperature, the charging would go on with a micro-current until it returned to normal.Then proceed to high-current charging.During the whole charging progress, the charger automatically keep making temperature detect. If the temperature is much higher (over 55 degree), the charging would be stopped and the light would flash Green.
D. Chemistry Analysis and Voltage Identification
Before charging, the charger would make a chemistry and voltage detection on the battery. And then adjust its own charging voltage and current data according to the analyzed results which will keep the battery charging better and safer.
E. Self-selective charging Methods
For the charger’s automatic chemistry analysis and voltage identification function, so it can charge different batteries. The battery can be 3.6V Li-ion / 7.2VLi-ion, 7.2V Nickel-metal hydride or nickel-cadmium battery. With different pods, it can charge different battery with different brands.
F. Input Voltage
{AC Input:AC 115V 3.2A or AC 230V 1.6A} The charger has improved the standard of UL, JIS (100~132VAC), VDE, BS, SAA and CCC(185~264VAC) .
G. Oter features:
1. Each charger has 6 LED lights to show every pod's charging state
2.LED Indication: Charging---RED, Completed----GREEN, Abnormal---Flashing
3. The charger is designed with Moisture-Proof and Shock-resistant
4. The power-supply is designed in a box before fixed into the charger. This way makes the charger safer
5. Self-identify different kinds of battery's type and chemical composition then charging
{AC Input:AC 115V 3.2A or AC 230V 1.6A} The charger has improved the standard of UL, JIS (100~132VAC), VDE, BS, SAA and CCC(185~264VAC) .
G. Oter features:
1. Each charger has 6 LED lights to show every pod's charging state
2.LED Indication: Charging---RED, Completed----GREEN, Abnormal---Flashing
3. The charger is designed with Moisture-Proof and Shock-resistant
4. The power-supply is designed in a box before fixed into the charger. This way makes the charger safer
5. Self-identify different kinds of battery's type and chemical composition then charging
Packing & Delivery
Products with full protected package
OEM/ODM package is available. Standard export carton packing.
20-25 work days after payment,detail delivery date should be decided according to production season and order quantity.
Our Advantages
All kinds of testing machines to keep high quality products and long term development
ATEX certificate Ex ib IIB T6 Gb for fireman helmet headsets, IP54/55/67 for RSM
23R&D engineers including structural, process, PCB, Mechanical, electronics, acoustic, software and mold designers
We got water-proof IP68, IP67, IP66, IP65, IP57, IP55, IP54 different kinds of degree. We also have -30 degree low temperature report for batteries
FAQ
FAQ
Q: What's your estimated delivery time?
A: 7~10days for samples.25~30days for bulk order
Q: What's your terms of paymemt?
A: T/T, L/C,Western Union, Paypal for your choice!
Q: How long is your warranty?
A:Battery and charger 12months, Earphone 6months
Q: What certificates do you have?
A: CE,ROHS,ISO9001:2008,IP67,MIL-STD-810
Q: What is PTT (Push to Talk)?
A: All two way radios have a Push-To-Talk button. This is the button, usually located on the side of the radio, that is held down to make the radio transmit.
Q: Do battery need charge when you get at the first?
A: Upon delivery,battery is not fully charged. Recharge is needed. For Ni-Cd,the first charging should over night.
Ni-Mh and Li-ion can stop charge when the light green.
Why choose us?
We have full line products to support your communication radios !
We have the ability to do customized design according to your special need !
With mil. headset & battery & connector, and model factory to support you !
A: 7~10days for samples.25~30days for bulk order
Q: What's your terms of paymemt?
A: T/T, L/C,Western Union, Paypal for your choice!
Q: How long is your warranty?
A:Battery and charger 12months, Earphone 6months
Q: What certificates do you have?
A: CE,ROHS,ISO9001:2008,IP67,MIL-STD-810
Q: What is PTT (Push to Talk)?
A: All two way radios have a Push-To-Talk button. This is the button, usually located on the side of the radio, that is held down to make the radio transmit.
Q: Do battery need charge when you get at the first?
A: Upon delivery,battery is not fully charged. Recharge is needed. For Ni-Cd,the first charging should over night.
Ni-Mh and Li-ion can stop charge when the light green.
Why choose us?
We have full line products to support your communication radios !
We have the ability to do customized design according to your special need !
With mil. headset & battery & connector, and model factory to support you !
Recommend Products
该产品暂无评论。
